• 1106. C-Wing, Atlantis, Hiranandani gardens Powai, Andheri East, Mumbai 400076.

IG 30

Standard Accessories

  • Laser calibrated axis for high precise positioning Accuracy and Repeatability.
  • Auto & Manual Coolant system.
  • Dia 80 mm belt driven internal Grinding spindle with 2 sets of quill.
  • Machine with close enclosure.
  • AC Servo axis Drive.
  • Magnetic Shoe Chuck.*
  • Coolant tank with Magnetic Coolant Separator.

Optional Accessories

  • Servo Controlled C axis (Work Head).
  • Dia 100 mm belt driven Internal Grinding spindle in lieu of standard.
  • Paper band with Magnetic Coolant Separator in lieu of standard
  • Hydraulic diaphragm chucking system (without diaphragm chuck).***
  • Oil Mist Extractor (1500m³/hr.)
  • Heavy motor for work head (8/11 Nm).
  • Axis servo motor (11 Nm).
  • Inline Process Gauge.
  • Auto loading-unloading system (Based on component).

Specification

Model
Description Unit IG-30
Capacity
Centre height mm 350
Maximum job clamping (O.D) mm 300
Grinding Diameter (min/max) mm 16/280
Grinding depth max. mm 100
Maximum job weight kg 50
Work Head
Spindle speed range rpm 50-500
Spindle nose MT 4
Maximum swivel deg(°) 15°
Spindle motor power kw/hp 0.75/1
Cross table (X-axis)
X-axis stroke mm 200
Rapid feed rate mtr/min 15
Minimum resolution mm 0.001
Feed servomotor torque Nm 8
Longitudinal Table (Z-axis)
Z-axis stroke mm 300
Rapid feed rate mtr/min 15
Minimum resolution mm 0.001
Feed servomotor torque Nm 8
Internal Grinding Head
Spindle size-120mm x 250mm (Max.rpm) mm 12000/18000
Spindle motor Power kw/hp 3.75/5
Spindle motor speed rpm 2800
General
Total connected load hp 15
Supply voltage volts 415,3ph,AC 50Hz
Machine weight (Approx) kg 4500

Controller Specification

  • Siemens 808D Advanced Servo Controller.
  • Grinding cycles/Dressing cycles.
  • RS 232 C serial Interface port.
  • Pitch error & Back Lash compensation.
  • Electronic hand wheel.

OPTIONAL CONTROLLER : Siemens 828D Advanced 2/3 Axis Servo controller with Standard built-in Grinding cycles​.

Features

*Small size Magnetic Shoe Chuck if required.
**For Glass Scale Siemens 828D controller is mandatory.
***As per your Diaphgram chuck & Component.

Scroll Up