AUTOMATIC POSITIONING SURFACE POLISHING MACHINE
MAIN PURPOSE:
This equipment is suitable for polishing 2.5D, 3D glass, zirconia, metal and non-metal special-shaped curved surfaces.
TECHNICAL CHARACTERS:
- The equipment adopts continuous and uninterrupted polishing, loading and unloading methods, 3 stations for processing and 1 station for loading and unloading.
- The equipment has 3 sets of independent servo lifting processing station loading system, and the loading position of the loading plate is feedback controlled by the motor current.
- The rotation of the lower plate station is driven by a frequency conversion motor + worm gear reducer, and is positioned by a pin.
- This machine is equipped with vacuum air-liquid separation device, real-time monitoring of negative pressure, touch screen + PLC control mode.
SPECIFICATION
| Project | Unit | Parameter |
|---|---|---|
| product tray | mm | 12xφ420 |
| scan CD | mm | 3xφ920 |
| Upper plate lift motor | kW | 3×2.3 |
| Bottom plate rotation motor (frequency conversion motor) | kW | 4×2.2 |
| Lower plate station conversion motor (frequency conversion motor) | kW | 4.0 |
| Scanning disc motor (frequency conversion motor) | kW | 3×5.5 |
| On the stroke | mm | 200 |
| Lower plate station conversion speed | rpm | 0-10 |
| Bottom plate rotation speed | rpm | 0-40 |
| Scan disc speed | rpm | 0-280 |
| Air supply pressure | Mpa | 0.6 |
| Vacuum adsorption pressure | Kpa | -75 |
| power pressure | V | Three-phase five-wire AC380V |
| total equipment power | kW | 36 |
| Total mass of equipment | kg | 4900 |
| Equipment size | mm | 2540x2540x2600 |
PROCESSING WORKPIECE
The device can be processed workpiece, including glass, ceramic pieces, sapphire, bearings, valves, carbide inserts, seals, oil pump blades, piston rings, such as:
